START WITTMAX FJERNSTYREDE-BILER ELEKTRISK ONROAD 1-10

1/10 R/C CHASSIS KIT TB EVO.8

VARENR.   545317
PRODUCENTVARENR.   42383
PRODUCENTVARENR.   42383
PRODUCENT   TAMIYA
EAN   4950344423835
PAKNINGS ENHED   1/2



1/10 R/C Chassis Kit TB Evo.8

Tamiya welcomes a new variant to the TB Evo. series - the fastest shaft-driven chassis produced by Tamiya - which started in 2000.

With an updated chassis layout from Item 42315 (1/10 R/C Chassis Kit TB Evo. 7), its suspension features popular A-shaped arm which was used for Item 58693 (1/10 R/C TA08 PRO Chassis kit), and motor can be positioned in two locations.

Do not miss this chance to get this chassis featuring efficient drive and superior controllability!

About the model
• This is a 1/10 scale R/C shaft driven 4WD chassis assembly kit.
• Choose from two types of motor layout - front mid motor layout or rear mid motor layout.
• Lower deck and vertical upper decks are crafted in carbon fiber, and ensure pitch rigidity.
• Aluminum bulkhead and damper stay are one-piece component.
• 7mm suspension balls and king pins are combined for smooth motion. (= Item 22016)
• The front A-shaped arm suspension employs Super Short Big Bore dampers and uses 5.8mm balls to connect top and bottom sections for superior responsiveness.
• The rear suspension utilizes tie rods for easy adjustment of toe angle on upright side.
• The steering linkage is affixed directly to bulkhead to limit any impact upon chassis roll.
• Features efficient, fuss-free adjustment of motor backlash via two screws on chassis upside.
• Highly-efficient shaft-driven 4WD is achieved with a front direct coupling and double cardan drive shafts, plus a rear gear differential unit and aluminum drive shafts.
• Uses urethane front bumper (from Item 58693: TA08 PRO chassis) for great aerodynamics.
• Carbon fiber, floating R/C equipment deck attached by screws removes use of double-sided tape for maintenance.
• Comes with a carrying case.

New Parts

Carbon fiber components:
lower deck / upper decks x4 (two each for front mid motor layout or rear mid motor layout respectively) / R/C equipment deck<

Aluminum components:
one-piece lower bulkheads / front upper bulkhead / rear upper bulkhead / motor mount / propeller shafts (two for front mid motor layout and one for rear mid motor layout) / servo mount / center stiffener / king pin balls (Item 22016) / steering bridge / battery mount & mount spacer

Polycarbonate component:
Differential covers

Please note, this version is without Radio and ESC, we recommend the RC set and ESC from Mstyle.

 

Useful Materials from Tamiya.com

Please note all links below goes to www.tamiya.com

R/C Parts Matching List
Click here to get the latest list of Hop-Up Option and Spare Parts compatibility.

Chassis Parts Catalogs
Click here for catalogs of parts for use with various chassis.

R/C Model Chassis List
Click here to see a list of links to pages for major Tamiya chassis.

R/C Manual Download Page
Some of our R/C manuals are available for download. Click here to visit the page!

 

Alle viste priser er eksklusiv moms med mindre andet er angivet.